Setup Guide

The following section will guide you through the setup process of using pi-dns’ ad blocking DNS servers.

Click on the tab related to your system to get relevant setup instructions.

Note: These setup guides are under construction.

  1. Open Control Panel through Start menu or Windows search
  2. Go to Network and Internet category and then to Network and Sharing Center
  3. On the left side of the screen find Change adapter settings and click on it
  4. Select your active connection, right-click on it and choose Properties
  5. Find Internet Protocol Version 4 (TCP/IPv4) in the list, select it and then click on Properties again
  6. Choose Use the following DNS server addresses and enter the IP addresses of the two DNS servers nearest to you. For example:
    31.220.42.65
    95.216.181.228
  7. Press OK
  8. Back in the list, find Internet Protocol Version 6 (TCP/IPv6)
  9. Choose Use the following DNS server addresses and enter the IP addresses of the two DNS servers nearest to you. For example:
    2a01:6f0:ffff:49::abcd
    2a01:4f9:c01f:4::abcd
    
  10. Press OK twice to close the settings and you’re done!

Coming soon

Coming soon

Coming soon

Coming soon

Coming soon